Speed-Clear DIY KIT

Easy way to bundle it ALL. 

Kit includes, 4.5oz Speed-Clear, 3oz Level-IT, premixed to give you that 60/40 ratio, 3 Prep stage products, 3 Prep towels,2 Coating applicators, 4 gloves, 1 Back -up scuffing pad (for that unforeseen coating on the panel), more than enough to do 1 vehicle, possibly 2! Or several individual panels.

HOW TO USE 

Wash thoroughly and decontaminate with clay if needed. If possible try to coat inside or at least in the shade ( this allows you more time as you are learning),Let dry thoroughly, start with Prep 1, wipe panel(s) edge to edge top to bottom, using this prep time to map the panel. Mapping is understanding the body lines and familiarizing yourself with how you want to proceed when applying Speed-Clear. Follow up with Prep 2 & 3 in the same manner, you have been provided a new towel to use every time. After prep wait at least 5 minutes for chemical to disperse from panel. This is a great time if you haven't already to view the YouTube video or other socials for proper procedures and coating.

Apply a heavy coat of SPEED-CLEAR to the panel in side to side motions, from edge of one side of the panel to the edge of the other, overlapping each pass by about 50% and keep working the wet edge. Do not stop in the middle of the panel or lift in the middle, if needed reapply product as needed to keep a wet pass. Completely coat the panel. Look at the panel from several angles, checking that you've not missed any spots. SPEED-CLEAR will flow out, self-level and start to cure. Once you're satisfied with your work, leave the vehicle to dry/cure for several hours.  Keep the vehicle dry for the first few days, while the coating is fully curing, to avoid any issues caused by moisture.

COMPLETELY saturate your applicator folded in a square, squeeze to ensure no dry spots. Apply from top to bottom edge to edge, overlapping last pass by 50% each time, if needed reapply more product should you feel drag on the applicator. Pay close attention to where you have been and if needed do any corrections immediately! We have shorts on our YouTube page showing the way to coat different panels, but if needed reach out to us before starting with any questions, we want you to succeed!

• For a visual on how to apply, please watch the application videos on our YouTube.

  Follow on Socials for more "How to video."

With any questions please reach out to us and we will get back to you as quick as we can    ( just might have an applicator in our hand).